Anti-vibration boring bars “SumiTurn X-Bar”

  • Anti-vibration boring bars “SumiTurn X-Bar”

Anti-vibration boring bars “SumiTurn X-Bar”

Anti-vibration boring bars “SumiTurn X-Bar”

Amazing anti-vibration capabilities provide low cost, high efficiency and deep-hole boring operations

Anti-vibration mechanism

Features

Precaution

Caution

Clamping on labeled portion may prevent the tool from working correctly (due to the built-in anti-vibration mechanism). Therefore, minimum tool overhang should be 3.5D.

ApplicationRange

1. Achieves 6D deep hole boring for ø32mm or more.
2. Negative type insert reduces the per corner cost.
3. Coupled with a wide selection of chipbreakers to cover a wide range of applications from roughing to finishing.

<tbody

Cutting
Conditions
vc=20 to 200m/min, f=0.1 to 0.3mm/rev, ap=0.1 to 2.0mm

*Actual tool overhang amount may change depending on work material, tool geometry, machining conditions, etc.

SKH55(High speed steel)

X-bar Ex1
Holder XBPT216R(B16R-STUPR1103-20)
Insert TPMT110304N-SU(AC820P)
Cutting
Conditions
vc=120m/min, f=0.20mm/rev, ap=1.0mm, Wet

SUS316(Joint parts)

X-bar Ex2
Holder XBPT325R(B25T-STUPR1604-32)
Insert TPMT1604N-SU(AC820P)
Cutting
Conditions
vc=104m/min, f=0.25mm/rev, ap=0.15mm, Wet

linebreak