Feature of Brilliant Coat
Employs new PVD process, Brilliant Coat(*)
1. Newly developed PVD coating with excellent wear resistance and lubricity.
2. Low reactivity with work materials for beautiful finished surfaces.
ballondisc
(*)There may be minor differences in the colour tone/lustre of Brilliant Coat grades due to the interference of light. Such differences have no effect on performance.
T1500Z
Superior turning quality thanks to Brilliant Coat, a new PVD coating with excellent lubricity.
A general purpose coated cermet grade capable of maintaining high-quality finished surfaces while providing excellent wear resistance.
T3000Z
A coated cermet grade designed with stability in mind that provides superior fracture resistance.
Covers a wide range of applications from roughing to finishing.
T1000A
An uncoated cermet grade designed with wear resistance in mind that provides long tool life and excellent wear resistance in continuous finishing and profiling applications.
T1500A
A general purpose uncoated cermet grade that provides excellent value for money and delivers improved finished-surface quality while providing good wear and fracture resistance.
SCM415 Shaft
Insert |
TNMG160408N-SU(T1500Z) |
Cutting
Conditions |
vc=220m/min, f=0.26 to 0.34mm/rev
ap=0.20 to 0.25mm Wet |
SCM420H Automotive Component
Insert |
TNMG160408N-LU(T1500Z) |
Cutting
Conditions |
vc=200m/min, f=0.15mm/rev, ap=1.00mm, Wet |
S48C Guide
Insert |
TPMT090204N-LU(1500Z) |
Cutting
Conditions |
vc=162m/min, f=0.13mm/rev, ap=0.55mm, Wet |
S45C Sleeve
Insert |
DCMT11T304N-LU(T1500Z) |
Cutting
Conditions |
vc=230m/min, f=0.10mm/rev, ap=0.50mm, Wet |
S43C Lower Shaft
Insert |
CPGT080208N-SD(T1500Z) |
Cutting
Conditions |
vc=140m/min, f=0.15mm/rev, ap=0.50mm, Wet |
S43C Machine Component
Insert |
VNMG160408N-FL(T1500Z) |
Cutting
Conditions |
vc=180m/min, f=0.20mm/rev, ap=0.20 to 0.90mm, Wet |
SAPH440 Press material Piston Parts
Standard life : Finished surface undulation
Insert |
DCMT11T308N-FB(T1500Z) |
Cutting
Conditions |
vc=360m/min, f=0.14mm/rev, ap=0.30mm(Rough) 0.02mm(Finish), Wet |
SCMr420H Clutch Parts
Standard life : Surface properties(White turbidity and exit burrs)
Insert |
DCMT11T304N-FB(T1500Z) |
Cutting
Conditions |
vc=220m/min, f=(1)0.15mm (2)0.12mm (3)0.18mm/rev, ap=0.25mm, Wet |